Other model reviews and posts you might like
Review: Wilesco D320 Steam Lorry with Radio Control
Review of the Wilesco D320 Steam Lorry
Take a look back at the history of how goods were transported with this fully-working scaled model lorry that can be dated back as far as 2015. Back in those days, goods transporting was far more laidback despite being a more labour-intensive and time-consuming process.
Fitted with a fully functioning steam engine that is powered by dry fuel tablets, the Wilesco D320 is a must-have for hobbyists and collectors alike. Good for at least fifteen minutes of running per use, this steam lorry also comes complete with a radio control that allows you to turn the lorry left and right as it trundles along.
A real thing of beauty, the D302 contains a solid brass boiler, flywheel and drive chain and can have a number of accessories attached. These could include a pull-along trailer, and a canvas to cover the onboard trailer but there are many other options out there.
While this model might look like a toy, it is not suitable for children under the age of 14 and adult supervision is always required. The Wilesco D320 is a real working steam engine which means fire, steam and hot surfaces, so care should always be taken when being used.
Under the Hood
The driver’s cab is where the boiler and double-acting cylinder are placed while the steering mechanism of the D320 can be found at the rear of the model. That boiler can hold around 200ml of water and keeping it full is done by removing the caps roof. A sight glass will let you gauge the level of water so that you know when you will need to refill. A steam pressure gauge is also featured and will let you know everything is hot enough to start moving.
With measurements of 49 x 22 x 26cm and a weight of 3.1kg, this is a fairly sizable and heavy unit compared to other Wilesco steam engines. This is very welcome however as you just know that you have something that has been built to high quality and with sturdy materials.
Radio control helps by adding convenience to the operation of the unit, saving you from chasing it around to set the steering in motion. As for maintenance and clean up after use, this is fairly minimal compared to other steam engines from Wilesco.
Built to scale
Many accessories available
Solid brass boiler
This nostalgic model from Wilesco is definitely one of their most beautiful and once up and running, the sound emitted is typical of their whole range of model steam engines. When not in use and out on display, the Wilesco D320 will bring charm to any room and will be a real talking piece with visitors.
Whether you are a collector, hobbyist or somebody interested in the history of steam engineering, the Wilesco D302 is a model that you should certainly consider owning. In terms of pure beauty and power, this is without a doubt one of the finest pieces that Wilesco has produced.
Review: Mamod SA1L Working Live Steam Limousine (Silver)
Review: Mamod SA1L Working Live Steam Limousine (Silver) – Classic Car of Yesteryears
Car fanatics and lovers of the Rolls-Royce Silver Ghost are going to love the Mamod SA1L live steam limousine. The SA1L takes its inspiration from the widely loved Rolls-Royce car. The Rolls-Royce name and many car models in their series have managed to acquire titles for themselves that are certain to make them blush. From the, ‘best car in the world’ to the ‘Silver Ghost’ name, reputation and more, the cars manufactured by Rolls-Royce are undoubtedly some of the greatest in history. Mamod know a good thing when they see one and have outshone themselves with a model car that, dare it be said, is on par with the Silver Ghost it mimics. Just like the Silver Ghost, this model car is appealing to the eye, sturdy, reliable and fun.
The SA1L is perfect for those who people missed out on the chance to drive their own luxurious car from times gone by. If you’ve got a teenage son who loves cars (as most teenage boys do) and you’re not ready for him to hit the road just yet, this car is the perfect gift. Whilst younger children usually have a fascination with cars, this model is not like a generic toy and needs supervision from an older teenager (14 years old +) or adult. For these reasons, the model is great for families who would benefit from some good old fashioned quality time together. What better way to spend a Sunday afternoon than by turning the television off and throwing yourselves back into yesteryear with a swanky car good enough to make modern day cars jealous of?
This fully functioning model is made up of many components that are needed to work together to run:
fuel tablets, oil and funnel (these are included when you buy the model)
pressure safety valve (to control the pressure of the working parts of the car)
heavy gauge steel and brass (crafted in England)
When the model is constructed (and the SA1L has already been built for you, so you don’t even need to worry about that), it weighs 3.8kg, is roughly 16 inches (41 cm) in length and its dimensions are 410 x 198 x 160.
Mamod has a keen eye for detail and even the interior of the car is well upholstered. A Lilliputian would be happy perching in one of these seats; it really is as if someone has take a real life Silver Ghost and minimized it!
This model is simply stunning and will benefit from a home or person that is dedicated to taking pride and care in their selection of live steam vehicles and models. If this is something you are interested in, then the SA1L is definitely worth you sparing a minute to look at and consider adding to your set. If you do decide to invest in this fine piece, you’ll probably end up being the envy of all your model collecting family and friends!
Review: Wilesco Showman’s Engine D409
Review of the Wilesco Showman’s Engine D409
The Wilesco Showman’s Engine D409 is a fully working scale model of a steam-driven farm engine, the likes of which would have been used to power agricultural machinery such as threshers and ploughs before the modern tractor.
You can still see a small number of engines of this type in the UK today, powering old-fashioned fairground carousels and other rides, as well as at shows and fayres around the country, where they often draw a large crowd of fascinated onlookers.
This technically perfect scale replica is painted in traditional colours and carries traditional writing on the side of the canopy indicating its origin in Middlesex, England. It is delivered ready-made, with no assembly needed, and will look stunning either as a static model or a working demonstration of times gone by.
On the model itself, the boiler measures 7.3” by 1.8” and has a water volume of 14in. A water gauge glass is included, and the boiler vessel itself is chemically painted black, giving a durable protective finish.
A powerful, double action cylinder powers the engine alongside the red-painted, 3.2” flywheel. Depending on the direction of rotation of the flywheel, the engine can be run in forward or reverse.
Traditional chain steering as would be seen on a full-size engine of this type is included along with a spring loaded safety valve, steam regulator, steam jet oiler, footbridge, and steam whistle. A clutch engaged gear wheel allows the engine, and dynamo, to be used while stationary as well as when moving.
A dynamo lights the eight LEDs mounted on the canopy of the engine. Water is condensed and reused from the engine, just below the chimney.
Users will be able to run the engine for up to 15 minutes on each charge of fuel.
Each individual part of the engine is carefully constructed from finely painted, high quality, metal. The model is a total of 13” long, almost 6” wide, 8” high and weighs 4lbs.
Fuel, in the form of dry spirit tablets, as well as other consumables, are available from specialist retailers as well as online.
As a working steam engine, this item is not a toy and is not recommended for anyone aged under 18. Where the engine is being used in the presence of children, close supervision by a responsible adult it required. Steam engines can be dangerous, and if not properly maintained there is a very real risk of explosion. Users should be certain to follow all operating and maintenance instructions provided by the manufacturer.
High-quality, steam traction and show engine
Manufactured from high-quality metal parts
Technically perfect, fully working engine
Clutch gear enables stationary as well as mobile use
Dynamo powers LED lighting around the engine canopy
Delivered ready-made, no assembly needed
A stunning static model, or fascinating demonstration of technology from times gone by
Variants of the Wilesco Showman’s Engine D409
Many Wilesco products are available in different variants – the D409 reviewed here is a working steam model that can be upgraded with a radio remote control.
The model also comes in two other variants:
Wilesco Showman’s Engine D499 – which is the same fully-built model, with remote control.
Wilesco Showman’s Engine D419 – which is a kit for the model (which requires assembly).
Review: Mamod TE1a Green Traction Engine
Review of the Mamod TE1a Green Traction Engine
When is a toy not actually a toy? When it is an actual steam engine in full working order, powered by its own boiler. This is the 1313 Steam traction engine from Mamod (model number TE1a Green), a replica model of a Victorian era English tractor engine that comes in black, with a British racing green boiler, and cheerful red wheels. There is also a version in brass with black wheels. This engine is modelled on the traction engines made by the iconic Doncaster Works, which also produced the famous Mallard and Flying Scotsman steam engines.
Traction engines powered their way along the roads, such as they were in the late 1800s, earning them the name of road locomotives, to differentiate them from railway locomotives. They pulled heavy loads and were a crucial cog in the industrialisation of nations. Their demise came in the early 20th century as the internal combustion engine replaced steam.
The 1313 is Mamod’s standard model traction engine in its range. It’s hugely popular and for good reason – this working model is affordable and perfect for beginner collectors, or as a gift to a youngster keen on Victorian engineering. It’s been made by Mamod in England for 50 years now, using the exact same design, although early models used methylated spirits for fuel. It isn’t unusual for owners to still have, and use, engines that had been brought 30, 40 or 50 years ago. These have become almost heirloom toys, with parents handing them down to their children, who also pass them on.
The Steam traction engine comes fully assembled and ready to go. Because it gets very hot, and has lots of sharp bits, not to mention the potential dangers of the steam and boiler, this toy is recommended for children aged 14 years and upwards.
The boiler is stoked through the solid fuel blocks provided with the engine, and once it gets sufficiently hot, the little engine will power along quite quickly. It also comes with Mamod oil for lubrication. You only need to add water to the boiler. However, you really need to put water in that is already boiling. Otherwise, you’re in for a bit of a wait for the steam to get up.
The engine is really robust, being made of heavy gauge steel and brass and a reasonable size at 10 inches long. For the metric minded, its full dimensions are 178mm x 137mm x 270mm. It’s also reasonably hefty at four pounds, or 200 grammes, but not as weighty as you might expect from such a little powerhouse.
This is simply a fun toy to play with. There is a sense of excitement from the steam coupled with the smell of the fuel burning, and the power of the traction engine as it moves along. It is also educational, helping youngsters understand the power and engineering of the great steam engines of our past.
Exact replica of a Victorian road locomotive
Steel and brass
Working steam engine with boiler
Moves at speed along the ground
1 x packet of solid fuel tablets
1 x bottle of lubrication oil
Weighs 200 grammes
Measures 178mm x 137mm x 270mm
For ages 14 up